Introduction

The Schneider Electric EasyLogic EM6400NG+ is a high-performance energy and power monitoring meter tailored for industrial, commercial, and utility applications. Built for precise metering, diagnostics, and energy efficiency analysis, it is an essential tool for electrical panels where accuracy, reliability, and advanced communication are critical.

Product Range and Type

• Product Series: EasyLogic

• Model: EM6400NG+ RS-485

• Product Type: Power and Energy Meter

• Reference: METSEEM6400NGRSCL1

Applications

Designed specifically for power monitoring and analysis, the EM6400NG+ supports:

• Energy consumption tracking

• Peak demand identification

• Power quality assessment (up to 15th harmonic)

• Event and fault analysis through time-stamped logs

Measurement Capabilities

Electrical Parameters Measured:

• Voltage Types: Line and phase voltages (U21, U32, U13, V1, V2, V3)

• Current Types: I1, I2, I3, Neutral current, Peak demand

• Power Types: Active (P, P1, P2, P3), Reactive (Q, Q1, Q2, Q3), Apparent (S, S1, S2, S3)

• Power Factor: Signed, four-quadrant, Displacement PF

• Energy Types: Active, Reactive, Apparent (four-quadrant signed)

• Demand Metrics: Demand power and demand current (present & past values)

• Frequency: 45–65 Hz with ±0.05% accuracy

• Unbalance Metrics: Voltage and current unbalance

• Harmonics: Total Harmonic Distortion (THD) and individual harmonics up to 15th order

Electrical Specifications

• Supply Voltage: 40–300 V AC/DC

• Rated Current: 1 A / 5 A

• Power Consumption:

  • 6 VA at 277 V (Phase-Neutral)

  • 2 W at 277 V

• Sampling Rate: 64 samples per cycle

• Accuracy:

  • Voltage, Current, Power: ±0.5%

  • Frequency: ±0.05%

  • Power Factor: ±0.01

• Compliance:

  • Active Energy: Class 1 (IEC 62053-21)

  • Reactive Energy: Class 2 (IEC 62053-23)

  • Harmonics: Class 5P (IEC 61557-12)

Network and Communication

• Supported Networks:

  • Single-phase and multi-phase configurations: 1P+N, 2P, 2P+N, 3P, 3P+N

• Communication:

  • RS485 Port

  • Protocol: Modbus RTU (4800 to 38.4 kbps)

  • Isolation: 2500 V

• LED Indicators:

  • Green: Communication activity

  • Red: Output pulse (1–9,999,000 pulses/kWh, kVAh, kVARh)

Display and Interface

• Display Type: Red 7-segment LED

• Display Format:

  • 3 fields, 4 characters each

  • 12-digit numeric, 14.2 mm character height

• User Access: Tamper-proof settings with access code protection

Mechanical Design

• Material: Flame-retardant Polycarbonate (UL 94 V-0)

• Mounting: Panel or flush-mounted with clamp support

• Dimensions:

  • Width: 96 mm

  • Height: 96 mm

  • Depth: Panel – 73 mm, Outside – 13 mm

• Weight: Net – 600 g

• Terminal Connections:

  • Screw clamp terminals for all circuits

  • Wire sizes: 0.33 mm² to 3.31 mm²

  • Tightening torque: 0.9–1 N.m

Environmental & Safety Standards

• Protection Rating:

  • Front: IP51 (IEC 60529)

  • Body: IP30

• Temperature Ranges:

  • Operating: -10 to 60°C

  • Storage: -20 to 70°C

• Humidity: 5–95% RH at 50°C

• Altitude: ≤ 2000 m

• Pollution Degree: 2

• Installation Category: CAT III (480 V), CAT II (600 V)

• Insulation Class: Class II

Data Logging and Displayed Information

• Recorded Data:

  • Energy logs

  • Min/Max of voltage, current, frequency, power factor, power, and demand

• Demand Intervals: Configurable (1 to 60 minutes)

• Event Logs: Time-stamped for diagnostic accuracy

Certifications & Compliance

• Certifications:

  • CE, CULus, C-Tick

• Standards:

  • IEC 61010-1 (Ed. 3)

  • UL 61010-1

  • CSA C22.2

Environmental Impact and Sustainability

Schneider Electric is committed to sustainable practices under its “Use Better, Use Longer, Use Again” initiative. The EM6400NG+ supports:

• Packaging made from recycled cardboard

• RoHS compliant (SCIP #1e118aef-b19c-4467-88e5-d3127183205f)

• WEEE directive adherence

• Circularity profile available

Packaging Information

• Package Type: Single unit (PCE)

• Dimensions:

  • Height: 10.3 cm

  • Width: 11.6 cm

  • Length: 13.2 cm

• Weight: 500 g