Janatics A23050040O (A23 Series) 50×40mm Basic Magnetic Cylinder | Product Guide
Janatics A23050040O is an A23 series basic pneumatic cylinder with a 50 mm bore and 40 mm stroke, designed for reliable linear motion in industrial automation. It is a double acting cylinder and includes a magnetic piston, making it compatible with sensor-based position detection (reed/proximity sensors).
Key Specifications
-
Brand / Series: Janatics / A23
-
Model / SKU: A23050040O
-
Type: Basic Cylinder
-
Operation: Double Acting
-
Bore Size: 50 mm
-
Stroke Length: 40 mm
-
Magnetic Piston: Yes (sensor-ready)
-
Cushioning: Adjustable (both ends) (as per series design)
-
Port Thread: G1/4 (typical for 50 mm bore; verify if your variant differs)
-
Operating Pressure Range: 0.5 to 10 bar (series standard)
-
Operating Temperature: -10°C to +60°C (series standard)
What “Basic Magnetic Cylinder” Means
-
Basic: Cylinder body is supplied without special mounting brackets (foot, flange, clevis, trunnion, etc.).
-
Magnetic: Piston contains a magnet so external sensors can detect piston position through the body.
Typical Applications
-
Packaging and sealing machines
-
Fixture clamping and eject mechanisms
-
Material handling and automation lines
-
General-purpose linear actuation in OEM machines
-
Sensor-based end-position feedback systems
Compatibility Notes (Important)
-
Sensors: Use compatible reed/proximity cylinder sensors for magnetic pistons.
-
Mounting: If you require foot/flange/clevis mounting, select the correct mounting accessory/kit separately (based on your machine design).
-
Ports & Fittings: Confirm your fitting standard (G thread) and tubing size before installation.
When to Choose This Model
Choose A23050040O when you need:
-
50 mm bore for higher push/pull force
-
40 mm stroke travel
-
Sensor-ready magnetic piston for feedback/automation
-
A reliable double-acting cylinder for repeated industrial cycles
Need Selection Support?
Share your machine details (mounting style, operating pressure, speed/cycle rate, and sensor requirement), and our team will confirm the best matching cylinder and compatible accessories.
Related Articles
SOP: Replacing Janatics A23050040O Pneumatic Cylinder (Safe Removal, Installation & Verification)
Purpose This SOP guides technicians to safely replace Janatics A23050040O (A23 Series) 50×40mm double acting magnetic cylinder and verify correct operation after replacement. Scope Applies to machine maintenance, breakdown replacement, preventive ...
Janatics A23050040O Quick Start Installation Checklist (Mounting, Ports, Speed Control & Sensor Setup)
This checklist helps you install and commission Janatics A23050040O (A23 Series) 50×40mm Basic Magnetic, Double Acting Pneumatic Cylinder correctly on the first attempt. Use it for machine commissioning, maintenance replacement, and field ...
Preventive Maintenance Checklist for Pneumatic Cylinders (Daily/Weekly/Monthly/Quarterly PM)
This PM checklist helps improve cylinder life, reduce leakage, prevent sticking, and avoid unexpected breakdowns. It applies to double acting and single acting pneumatic cylinders, including magnetic sensor-ready cylinders used in industrial ...
Operator Manual Of Vision Inspection System For Air Cleaner
Dear User , In today’s advanced manufacturing landscape, ensuring the quality of components is paramount. The Vision Inspection System for Air Cleaner components plays a crucial role in achieving this goal. Designed to deliver precise inspections and ...
IS 108 MM/4NO-2E0 - Inductive switch
Basic Data Series: 108 Typical Operating Range Limit (Sn): 2 mm Operating Range (Sa): 0 ... 1.6 mm ⚡ Electrical Data Protective Circuits: Overload protection Polarity reversal protection Short circuit protection Supply Voltage (UB): 10 ... 30 V DC ...